Bike Sale/Closeouts Petoskey Michigan

Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.

When you ride in frigid conditions, your options for lightweight insulation under your outerwear are limited. It's typically been an fleece jersey with rear pockets that only adds to bulk and weight. Insulation with a high warmth to weight ratio, like down feathers or polyester fiber-fill are ideal, but those materials need to be encapsulated with a coated fabric to contain them, cutting breathability down significantly. Our solution is Polartec Alpha insulation that provides insulation without the need to encapsulate, giving you unimpeded breathability for a warm, dry ride. The outer shell is lightweight and uncoated, furthering the flow of perspiration and allowing the piece to pack down when you need to de-layer when things get too hot. The jacket is designed to be worn under an outer jacket, such as our Deflect H2O pieces, so the fit is close to the body to eliminate any bulk. An under-the-helmet hood provides an added wind layer and traps heat in were you lose it, at the top of your head, and we finish off the neck and wrists with reflective binding for visibility in case you're caught out after sundown. - Woven outer shell with 90g Polartec Alpha breathable insulation combine to create a packable and warming insulation piece. - Non-insulated hood is intended to be used under the helmet to keep the wind at bay and to trap heat on cold rides. - Two front hand pockets keep your hands warm off the bike and provide room for your small essentials and electronics. - Inside pockets are perfect to store a hat or gloves when things start to heat up. - Edge binding at the wrists and collar seal in warmth and feature reflective tape woven-in for increased visibility to motorists in low-light conditions. - Deflect UV 50+ protects against harmful UV rays. - Fit is close to the body for layering under outerwear. For a looser, "street fit," we recommend one size up. - Shell fabric weight: 48g

Specialized's Atlas Knee Pads protect XC and trail riders from abrasion and minor impacts while maintaining a sleek fit for mobility. The custom formed, anti-shock foam pad provides protection while remaining lightweight and flexible, making the pad equal parts comfortable and confidence inspiring. This slip-on protector incorporates an extra tall cuff to keep the pad comfortably in place while pedaling and helps protect in the event of a minor impact. - Custom-formed pad shape with anti-shock foam delivers efficient protection. - Extra tall elastic cuff with silicone grippers ensures a secure, comfortable fit. - VaporRize body materials transfer moisture away from the skin and regulate temperature. - Articulated slip-on construction with open-back design provides pedaling comfort and a secure fit.

Our Standard Presta Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

Back by popular demand, the Air Tool MTB Floor Pump is better than ever. Designed for low pressure, high volume tires, it provides precise pressure to ensure that your tires are set up for whatever the trail throws at you. - Oversized 3" (76mm) gauge has 0-40 PSI range for maximum resolution when filling large tires. - Massive 508cc volume aluminum barrel pushes enough air to seat tubeless tires. - Ergonomic Wing handle with pressure relief valve. - Auto selecting SwitchHitter II technology. - Includes spare rubber seal for head. - Max pressure: 40 PSI (2.7bar) - Volume-per-stroke: 508cc

For as long as there've been saddles, women have been having issues with them. But, where some see unsolvable problems, we see practical solutions. With our patented design, MIMIC technology helps create a saddle that perfectly adapts to your body to give you the support you need. And, when you combine this technology with the long-nosed, flat profile of the Phenom Comp saddle, with its hollow Cr-Mo rails and Level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Level II padding: Medium density foam for bike feel with additional cushioning. - Light, durable, and hollow Cr-Mo rails. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.

- 6061 Premium butted Aluminum, high-strength design. - Short reach for optimal brake/shift control. - Shallow Bend Drop: 125mm drop x 65mm reach

The Specialized Women's Tahoe mountain bike shoes were designed to deliver rugged and dependable off-road performance, especially if your rides see a good deal of hiking. To do so, they feature a SlipNot rubber outsole for added grip over roots and wet terrain. And to keep the shoes stiff enough for riding and flexible enough for walking, they also have a Lollipop inner plate that sits in a bed of comfy EVA padding. The fit is relaxed for everyday use, and the Body Geometry sole provides ergonomically designed comfort and efficiency. - Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - SlipNot rubber compound developed in Specialized's tire lab optimizes shoe and pedal connection. - Stiff Lollipop inner plate delivers high performance pedaling, and it sits in a bed of EVA to soften landings and maintain off-the-bike traction. - Relaxed Fit for a balance of pedal feel and walking comfort. - Lacelock elastic keeps laces out of chainrings. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Toe and heel overlays provided added abrasion resistance. - Approximate weight: 325g (1/2 pair, size 39)

Finding the perfect cross country race shoes can be tough going, but with the S-Works Recon shoes, we've made the choice simple. Exceptional power transfer? Check. Gram-counter approved? Check. Undeniable style? You got it. With the S-Works Recon you get XC-focused mountain bike shoes that truly have no compromises. We took a no-holds-barred approach to transferring every bit of your power to the pedals. The sole utilizes a rubber toe and heel for superior off-the-bike traction, while the pontoons are made of a harder TPU to provide excellent stability and power transfer to the pedal. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With all of these features combined, you can be sure that we've kept in line with the motto "every watt is sacred." In the comfort arena, we kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. We also took luxury into account by designing the S-Works Recon to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy Boa dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial-in your fit. The S-Works Recon embodies everything we know about footwear, compacted into one shoe with no compromises, no shortcuts—just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 270g (1/2 pair, Size 42)

The Expert XC Mountain Bike shoes take the spirit of high performance found in the S-Works iteration and puts it in a value-loaded package. Along these lines, you'll find that it has everything you need to get your feet wet in cross country racing and riding, like a light overall construction, a sophisticated carbon outsole, a single lightweight snap-replaceable IP1 Boa closure, and a durable SlipNot rubber tread. So go ahead, push it a little harder—these shoes are here to take you to the next level. - Body Geometry sole and footbed construction is ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon outsole is designed to flex in the toe for more comfortable walking, while it's directionally stiff in order to increase power transfer. - Boa IP1 Snap dial closure for on-the-fly micro-adjustment, backed by the Boa lifetime guarantee. - Light, supple thermo-bonded upper for a superior fit. - SlipNot rubber outsole is optimized for grip & durability in all conditions. - Removable toe lugs for added traction and run-ups. - Standard Fit for on-bike support and all-day comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 350g (1/2 pair, size 42)

Whether you find yourself in the gym sweatin' in spin class or out on the open road, our Women's Remix Road shoes are here to provide ample performance and comfort. They're loaded to the gills with comfortable, performance-enhancing Body Geometry features, and they also have highly breathable upper and easy-to-use laces. Consider them a simple, no-nonsense footwear solution to your active lifestyle. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Welded mesh & TPU upper provides high levels of breathability and supple comfort. It also equates to less stitching and seams against the foot, so you won't experience irritation or chafing. - Laces were used over buckles for a nearly infinite level of fit customization. - Two-bolt system fits SPD and all mountain pedals, making them perfect for spin class and road riding. - Rubber outsole is walkable and helps prevent slipping. - Standard Fit for on-bike support and all-day comfort. - Approx. weight: 275g (1/2 pair, Size 39)

If you're not into wearing Lycra kits or baggies off-road, you can wear our Atlas Pro Short instead. Our goal was simple, to create a minimal and clean short that was super light, breathable, and technical yet durable out on the trail. This is why we went with a new lightweight VaporRize stretch woven fabric that moves and flexes with you at every berm and drop. Features include two zippered pockets that provide a convenient storage solution for transporting your trail essentials. Center back waist adjustment tabs keep the outside waistband clean and non-obtrusive to packs or jersey fabric that can catch on exposed Velcro. This hidden elasticated adjustment system ensures that the fit of the shorts can be set to preference upfront without needing to readjust mid-ride. Roomy housing for the adjustment system acts as additional secure storage when not wearing a pack. Strategically placed laser perforations allow for welcomed cool airflow through hot zones. Lightweight bonded plastic snaps work in conjunction with a lightweight plastic coil fly zipper to keep the center-front light and comfortable while riding in and out of the saddle. - 12-inch inseam with tapered leg fit (size 34-inch waist) falls just above the knees, leaving room for pads without interfering on climbs. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - Fabric Content: 62% Nylon, 26% Polyester, 12% Spandex - Front snaps work in conjunction with a lightweight plastic coil fly zipper to keep the center-front light and comfortable while riding in- and out-of-the-saddle. - Lightweight VaporRize stretch-woven fabrics place an emphasis on durability and moisture management, leaving you dry, comfortable, and protected out on the trail. - Strategically placed laser perforations create a cool airflow through hot zones. - Two zippered pockets provide a convenient storage solution for transporting your trail essentials. - Waist adjustment tabs keep the outside waistband clean and non-obtrusive to packs or jersey fabric that can catch on exposed Velcro. This hidden elasticated adjustment system ensures that the fit of the shorts can be set to your preference upfront without needing to readjust mid-ride.

Specialized's S-Works SL Stem is sleek and lightweight. - 3D-forged and CNC-machined, 7075 aluminum road stem . - Includes expander plug for carbon steerer tubes and titanium hardware.

To complement their superb fit and breathability, our SL Pro Long Finger gloves feature our LifeLine palm construction for optimal hand-to-bar contact. This delivers maximum control and total comfort over long distances. You'll also find a smooth suede palm for security and an enhanced feel, and there's also a slip-on cuff that creates an incredible fit. And lastly, phone use is a non-issue, as the fingertips are designed to be touchscreen-compatible. With all of these features, it's no wonder the SL Pro Gloves are the choice of racers. - Clarino synthetic suede palm is made from an ultra-thin microfiber to combine durability with an exceptional feel at the bars - Perforated palm is strategically ventilated for improved breathability while riding - LifeLine palm construction eliminates bunching, providing a second-skin fit with better feel at the bars - Premium Italian upper is our lightest, most breathable mesh, and it has a UV 30+ rating - Slip-on cuff features taped seams for wrist closures that are clean, comfortable, and secure

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

Specialized's Comp Multi Stem is forged and machined from 6061 aluminum for stiff, responsive handling. The 6-degree rise puts your bars in a position for improved control and the 31.8mm handlebar clamp is compatible with composite and aluminum handlebars.

Don't let rain or cold stop your ride. The Defroster Trail Mountain Bike shoes feature a seam-sealed bootie construction, Thinsulate insulation, and a neoprene collar to help keep your feet warm and dry even in the worst conditions. Meanwhile, a grippy SlipNot rubber sole provides incredible stability and traction in slippery conditions. They're just what you need to keep riding through the season, no matter what Old Man Winter has in store for you. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Thinsulate 400-gram insulation for warmth, with waterproof, seam-sealed internal bootie construction and reflective heat-loss barrier in the sole. - Sealed canopy and neoprene collar keep heat in and water out. - Nylon composite sole with wet traction SlipNot rubber tread: Stiffness Index 6.0. - Single Boa dial for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Fully reflective to increase your visibility to motorists in low-light conditions. - Roomy fit to accommodate winter weight socks—no need to size-up. - Durable sheet rubber heel and toe protection. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 533g (1/2 pair, Size 42)

When you ride in frigid conditions, your options for lightweight insulation under your outerwear are limited. It's typically been a fleece jersey with rear pockets that only adds to bulk and weight. Insulation with a high warmth to weight ratio, like down feathers or polyester fiber-fill are ideal, but those materials need to be encapsulated with a coated fabric to contain them, cutting breathability down to zero. Our solution is Polartec Alpha insulation that provides insulation without the need to encapsulate, giving you unimpeded breathability for a warm, dry ride. The outer shell is lightweight and uncoated, furthering the flow of perspiration and allowing the piece to packable when you need to de-layer when things get too hot. The jacket is designed to be worn under an outer jacket, such as our Deflect H2O pieces, so the fit is close to the body to eliminate any bulk. An under-the-helmet hood provides an added wind layer and traps heat in where you lose it, at the top of your head, and we finish off the neck and wrists with reflective binding for visibility in case you're caught out after sundown. - Woven outer shell with 90g Polartec Alpha breathable insulation combines to create a packable and warming insulation piece. - A non-insulated hood is intended to be used under the helmet to keep the wind at bay and to trap heat on cold rides. - Two front hand pockets keep your hands warm off the bike and provide room for your small essentials and electronics. - Inside pockets are perfect to store a hat or gloves when things start to heat up. - Edge binding at the wrists and collar seal in warmth and feature reflective tape woven-in for increased visibility to motorists in low-light conditions. - Deflect UV 50+ protects against harmful UV rays. - The fit is close to the body for layering under outerwear. For a looser, "street fit," we recommend one size up. - Shell fabric weight: 48g

When you need comfort and performance at a tremendous value, look no further than our Women's RBX Jersey. It's made from our VaporRize knit fabrics that place a focus on balancing durability and moisture management, which means that you get a jersey that'll be long-lasting and quite comfortable over the long haul. Adding to the comfort, you'll find that we included a full-length front zipper for on-the-fly venting, as well as our Regular Fit. This cut hits the sweet spot in-between race and classic, so it's perfect for long, all-out rides, yet it's roomy enough to avoid any pinching or the feeling of being constricted in your movements. There are also three rear expansion pockets to house all of your small ride essentials. - Soft knit fabric pairs with breathable mesh to tackle moisture management, while remaining soft against the skin and supportive in all the right places - Three standard pockets provide ample space to securely house all of your ride essentials and electronics - Full-length front zipper gives you the power to manage ventilation under hard efforts or chilly descents - UPF 30+ rating protects your skin from harmful ultraviolet rays - Women's-specific Regular Fit is generous, so it fits close to the body without being constricting

Featuring a proprietary pad system designed by Dr. Kyle Bickel M.D., our Grail gloves are ergonomically designed for the best possible fit and protection. They're scientifically tested to help reduce hand numbness by improving circulation and equalizing pressure in the soft tissues of the hand. Even further, you'll find a durable synthetic leather palm, breathable mesh at the top of the hand, and our acclaimed Equalizer gel padding at the palm. - Clarino synthetic leather palm provides durability without sacrificing bar-feel. - Scientifically proven Body Geometry Equalizer gel pad distributes surface pressure over the hand, and this creates unrestricted blood flow enhancing overall hand comfort. - Tapered, slip-on cuff gives you a clean, sharp, and minimalistic construction for unrestricted comfort. - Breathable mesh upper is soft, comfortable, and made from high-stretch materials. - Soft and absorbent Microwipe thumb brushes away sweat with ease.

The update to our original Reflect Deflect jacket is a more versatile piece for adverse weather riding. 2-layer fabrics breath better than 3-layer fabrics, but they can feel clammy against your skin. By fusing brushed tricot dots onto the waterproof, breathable membrane, we raise the membrane off your skin, making it more comfortable and creating microchannels to allow air flow, aiding in breathability. We call the fabric innovation 2.75 layer and we give it our H2O treatment of taped seams and YKK Water Guard ZIppers. The geometric reflective pattern is composed of millions of microscopic glass beads that reflect light back to the source, making you visible from 360°. Dark and stormy nights don't have to be the start of horror movies anymore. - Deflect 2.75-layer is a woven fabric that's wind-resistant, water-resistant, and highly breathable in order to maintain an effective barrier between you and elements, while micro-fleece dots raise the fabric off the body to create channels for airflow. - Fully taped seams prevent water intrusion at the stitches and seams. - 360° high-visibility reflective print composed of millions of glass beads to keep you visible on the road. - One rear zippered pocket houses your small ride essentials and electronics. - Suede zipper shield protects your chin from abrasion. - Watertight YKK AquaGuard zippers prevent unwanted water seepage. - Zippered wrist seals let you cinch the cuffs down to your gloves, sealing out wind and water. - Front zippered hand pockets provide storage for small items and a place to warm your hands off-the-bike. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - Women's-specific Form Fit closely and precisely conforms to the curves of the body, ensuring an unrivaled level of fit. and comfort. - Fabric weight: 106g

The HyperViz Collection is the solution to 24-hour visibility. We combine Hyper Green (the most visible color on the light spectrum) with motion-activated reflectivity, colors, and patterns to drastically increase your visibility to motorists in all conditions. Whether you're an avid racer or a weekend warrior that puts countless hours in the saddle, you're likely to clock a ton of hours in high temperatures. For these days, we've developed the HyperViz SL Air Jersey to keep you cool and to protect you from the sun's harmful UV rays. It's been designed to keep you cool as its top priority, and it uses our soft VaporRize knit fabric that blends moisture management and durability to do so. It also features a UPF 30+ rating, so your skin will stay protected from harmful ultraviolet rays. And for the fit, our Slim Fit makes the SL Air Jersey feel like it's painted on, so it's ideal for riding and racing at the highest levels. - Contrasting Hyper Green and Black colors are paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day - Full-length front zipper gives you the power to manage ventilation under hard efforts or chilly descents - Slim Fit provides a precise, second skin level of fit that's ideal for hard days out, aggressive training, or top-level racing - Three standard pockets, and an additional zipper pocket, provide ample space to securely house all of your ride essentials and electronics - UPF 30+ rating protects your skin from harmful ultraviolet rays - VaporRize lightweight, soft mesh fabric tackles moisture management, while remaining soft against the skin and supportive in all the right places

We don't condone rutting out trails when it's pouring cats and dogs, but if you find yourself caught out, having the Deflect H2O Mountain Jacket will get you out of a jam. The solution to this problem all starts with the materials, which is why we used our own three-layer Deflect fabric for the construction. This woven fabric rests at the pinnacle of active weather protection, boasting equal parts breathability and wind resistance. And furthering these features, the jacket includes protective wrist seals and watertight, coated zippers throughout. To keep water off of your head, the jacket also features a three-panel hood with a rain visor that easily fits under your helmet. For protected storage of all your goods, we included a zippered chest pocket. - Deflect three-layer is a stretch woven fabric that's wind-resistant, water-resistant, and highly breathable in order to maintain an effective barrier between you and elements. - Fully taped seams prevent water intrusion, keeping you dry and protected for years to come. - One zippered chest pocket houses your small ride essentials and electronics. - Watertight YKK AquaGuard zippers prevent unwanted water seepage. - Adjustable wrist seals prevent wind and water intrusion. - A hood with a rain visor and adjustable drawcord keeps your head protected from the elements. - High-visibility, reflective elements increase your visibility to motorists and other trail users in low-light conditions. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - Relaxed Fit is loose and comfortable, and also provides plenty of room for layering underneath.

Ahh, the freedom of the open road, of the untrodden gravel path, of the bar stool at your local brewhouse post ride. Our new RBX ADV Drirelease Merino Wool jersey is as at home for a long day on backcountry gravel or fire road ascents as it is just relaxing with friends swapping stories from the adventure. The RBX ADV Drirelease Merino Wool jersey features a zipper-less front for a more casual look with close to body fit for on bike performance. Two small rear zipper pockets keep important items safe, while wool's natural cooling, wicking and odor neutralizing features make this jersey comfortable for fast riding over the long haul. It's UPF 30+ rating means you'll be protected from the worst the sun dishes out when you decide which unknown path you'll be turning down. - Drirelease Merino with FreshGuard naturally cools, neutralizes odor, and wicks away moisture to keep you dry. - Unique Jersey fit with no front zipper, providing the perfect piece for transitioning off the Gravel into the cafe. - Two rear zipper pockets provide secure storage for small items. - Bottom hem elastic keeps the jersey fit close to the body, even when it's worn over your RBX Adventure Bibs with SWAT Pockets. - UPF 30+ rating protects your skin from harmful ultraviolet rays. - Women's Specific Regular Fit is generous, so it fits close to the body without being constricting. - Fabric Content: 84% Polyester, 11% Merino Wool, 5% Spandex

When it comes to maintaining a consistent body temperature and comfort level, there's no quicker way to meeting the objective than with Specialized's Engineered Short Sleeve Tech Layer. The science behind it is pretty simple. The base layer is comprised of VaporRize knit fabrics that pull moisture away from the skin and distributes it across a large surface area where it can be rapidly evaporated. So when you think about it, no moisture buildup means that you won't experience any clammy chills as a result of dramatic temperature swings, and your skin, jersey, and jacket are going to remain dry in order to leave you comfortable. And furthering this, the Engineered Tech Layer features a seamless construction that increases comfort by eliminating seam-induced chafing throughout the base layer. This occurs by eliminating points where the materials could possibly bunch, while the design also creates the added benefit of a next-to-skin level of fit that benefits both comfort and moisture wicking. They also furthered this concept by incorporating targeted ventilation zones throughout the base layer, as well as a cycling-specific cut and targeted stretch that creates the proper "push-pull" for the movements of cycling. It's comfort taken to another level. - VaporRize knit fabrics are engineered to rapidly wick moisture away from the skin, keeping you cool, dry, and comfortable in any condition. - Cycling-specific fit and construction complement your movements in the saddle, while also allowing ample room for layering in order to eliminate bulk under the jersey. - Targeted stretch and support are built-in, so the base layer will hold and move with the body throughout the movements of cycling. - Seamless construction ensures the closest possible fit for maximum moisture management, while the elimination of seams also guarantees that chafing will be a non-issue. - Form Fit closely & precisely conforms to the curves of the body, ensuring an unrivaled level of fit and comfort.

When you need comfort and performance at a tremendous value, look no further than our Women's RBX Long Sleeve Jersey. It's made from our VaporRize knit fabrics that place a focus on balancing durability and moisture management, which means that you get a jersey that'll be long-lasting and quite comfortable over the long haul. Adding to the comfort, you'll find that we included a full-length front zipper for on-the-fly venting, as well as our Regular Fit. This cut hits the sweet spot in-between race and classic, so it's perfect for long, all-out rides, yet it's roomy enough to avoid any pinching or the feeling of being constricted in your movements. There are also three rear expansion pockets to house all of your small ride essentials, plus additional side panel pockets and hidden zipper pocket. - Soft knit fabric pairs with breathable mesh to tackle moisture management, while remaining soft against the skin and supportive in all the right places - Three standard pockets provide ample space to securely house all of your ride essentials and electronics - Full-length front zipper gives you the power to manage ventilation under hard efforts or chilly descents - 30+ UPF rating protects your skin from harmful ultraviolet rays - Women's Specific Regular Fit is generous, so it fits close to the body without being constricting

Depending on where you ride, you might wear a heavy-duty jacket a few times a year, but a long sleeve jersey like our Therminal Long Sleeve Jersey has the potential to be worn on every ride. This jersey is made from our Therminal fabric, which is designed to both insulate and manage moisture buildup. To do so, it has a brushed fleece interior with a light loft that pulls moisture away from skin to evaporate it at the material's surface. This loft also has the added benefit of insulation, which occurs by trapping tiny pockets of warmth between the skin and the fabric. The result? Consistent warmth that doesn't come with the risk of overheating. Keeping with this theme, the jersey has a pop collar to keep the wind off of your neck and out of the jersey. In terms of fit, the Therminal features our Standard Fit, which means that it'll lie close to the body, while still allowing ample room for layering underneath. And for storage, you'll find three back expansion pockets and one zippered security pocket to hold all of your ride essentials. - Therminal fabrics feature remarkable insulating properties, astounding levels of breathability and moisture management, and a lightweight, brushed back fleece that's soft against the skin. - Three back expansion pockets and one zippered security pocket provide plenty of safe and secure storage for your ride essentials and electronics. - Full-length front zipper allows you to dump heat on-the-fly. - Pop collar provides an extra layer of protection against the elements. - Reflective elements increase your visibility to motorists in low-light conditions. - Bluesign-approved fabric. - Deflect UV 50+ protects against harmful UV rays. - Standard Fit is generous, so it fits close to the body without being constricting. - Fabric weight: 300g

Pulling on an extra layer when the thermometer's rising might seem counterintuitive, but a proper base layer, like the Men's SL Short Sleeve Base Layer, can make all the difference. Wearing a lightweight base layer helps wick sweat away from the body, generating an even greater cooling effect. This is all due to the wicking properties of our VaporRize mesh fabric. To top it off, features like soft-puff stitching eliminate abrasion-inducing seams, while our Slim Fit conforms to your body. - VaporRize mesh fabrics are engineered to rapidly wick moisture away from the skin, keeping you cool, dry, and comfortable in any condition. - Cycling-specific fit and construction complement your movements in the saddle, while also allowing ample room for layering, eliminating bulk. - Soft puff stitching gets rid of chafing by greatly reducing the number of seams. - Form Fit closely and precisely conforms to the curves of the body, ensuring an unrivaled level of fit.

The HyperViz Collection is the solution to 24-hour visibility. We combine Hyper Green (the most visible color on the light spectrum) with motion-activated reflectivity, colors, and patterns to drastically increase your visibility to motorists in all conditions. Whether you're an avid racer or a weekend warrior that puts countless hours in the saddle, you're likely to clock a ton of hours in high temperatures. For these days, we've developed the Women's SL Air Long Sleeve Jersey to keep you cool and to protect you from the sun's harmful UV rays. It's been designed to keep you cool as its top priority, and it uses our soft VaporRize knit fabric that blends moisture management and durability to do so. Its long sleeve design also features a UPF 30+ rating, so your skin will stay protected from harmful ultraviolet rays. And for the fit, our Slim Fit makes the SL Air Jersey feel like it's painted on, so it's ideal for riding and racing at the highest levels. - 30+ UPF rating protects your skin from harmful ultraviolet rays - Contrasting Hyper Green and Black colors are paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day - Full-length front zipper gives you the power to manage ventilation under hard efforts or chilly descents - Three standard pockets and additional zipper pocket provide ample space to securely house all of your ride essentials and electronics - VaporRize lightweight, soft mesh fabric tackles moisture management, while remaining soft against the skin and supportive in all the right places - Women's Specific Slim Fit provides a precise, second skin level of fit that's ideal for hard days out, aggressive training, or top-level racing

Not every ride revolves around burying yourself to reach the county line. Sometimes, you want to arrive to the same destination with a little panache and style. This, however, doesn't mean you need to lack in performance. If this sounds familiar, Specialized's Women's Utility Polo is for you. Aside from a classic style, this polo boasts a construction that marries the aforementioned with an undeniable level of performance. Specialized made it from their drirelease Merino with FreshGuard material that naturally manages moisture and odor buildup. It also has an extremely soft hand against the skin, so you'll always be cool and comfortable, both during your ride and after. For the creature comforts, this polo includes a zippered side pocket to house small items like your phone or keys, a button-up collar that lets you vent building heat, and a relaxed fit that looks and feels just as at home on the bike as it does at the café. - drirelease Merino with FreshGuard naturally insulates for warmth, neutralizes odor, and wicks away moisture to keep you dry. - Zippered side stash pocket provides storage for your small ride essentials, like keys, a phone, or other portable electronics. - Reflective elements add to visibility in low-light conditions. - Deflect UV 50+ protects your skin from harmful, ultraviolet rays. - Relaxed Fit is more akin to your favorite shirt than a jersey, so it's generous and comfortable in the ride position.